Gw-instek PEL-3000 Series Programming Manual Uživatelský manuál stáhnout pdf (Strana 98)

PEL-3000 Programming Manual

Example

:POWer:T2 0.200

Sets the T2 timer time to 200ms.

Query example

:POWer:T2?

>0.200

Returns the T2 timer time as 200ms.

:POWer:FREQuency

Set

Query

Description

Sets the CP dynamic mode switching frequency.

This command along with the “:POWer:Duty”

command is used when the dynamic time setting

is set to “Freq./Duty”.

This command is only applicable for dynamic

mode.

Syntax

:POWer:FREQuency {<NRf> | MINimum | MAXimum}

Query Syntax

:POWer:FREQuency?

Commands

:POWer:DUTY

Parameter

<NRf>

Sets the switching

frequency in hertz.

MINIMUM or MIN

Minimum frequency

MAXIMUM or MAX

Maximum frequency

Return parameter

<NR2>

Returns the frequency in

hertz.

Example

:POWer:FREQuency 60

Sets the frequency to 60Hz.

Query example

:POWer:FREQuency?

>60

Returns the switching frequency (60Hz).

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 173 174

Komentáře k této Příručce

Žádné komentáře

Gw-instek PEL-3000 Series Programming Manual Uživatelský manuál Strana 98

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Gw-instek PEL-3000 Series Programming Manual