Gw-instek PEL-3000 Series Programming Manual Uživatelský manuál stáhnout pdf (Strana 8)

PEL-3000 Programming Manual

Configure GPIB Interface

To use GPIB, the optional GPIB port must be installed. See the user

manual for details.

Operation

1. Ensure the PEL-3000 is off before proceeding.

2. Connect a GPIB cable from a GPIB controller to

the GPIB port on the PEL-3000.

3. Turn the PEL-3000 on.

4. Press

Shift

Utility

Help

> Interface[F3] and set

the Interface setting to GPIB.

5. Set the GPIB address.

GPIB address

0~30

GPIB constraints



Maximum 15 devices altogether, 20m cable length,

2m between each device



Unique address assigned to each device



At least 2/3 of the devices turned On



No loop or parallel connection

Pin Assignment

112

1324

Signal

1~4

Data I/O 1~4

13~16

Data I/O 5~8

EOI

REN

DAV

Ground (DAV)

NRFD

Ground (NRFD)

NDAC

Ground (NDAC)

IFC

Ground (IFC)

SRQ

Ground (SRQ)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 173 174

Komentáře k této Příručce

Žádné komentáře

Gw-instek PEL-3000 Series Programming Manual Uživatelský manuál Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Gw-instek PEL-3000 Series Programming Manual