Gw-instek GOM-802 Programming Manual Uživatelský manuál stáhnout pdf (Strana 21)

DC MILLI-OHM METER

PROGRAMMER MANUAL

⎯ 40 ⎯

STATus:OPERation:CONDition? (query only)

Function:

Return the contents of the OPERation register. The METER, however, do

not use the OPERation register to report any conditions.

Syntax:

STATus:OPERation:CONDition?

Returns:

<NR1>

Examples:

STATus:OPERation:CONDition? returns 0.

STATus:OPERation:ENABle

Function:

Set or query the enable mask that allows the masked conditions in the

event register to be reported in the summary bit. If a bit is 1 (true) in the

enable register and its associated event bit changes to 1 (true), the

associated summary bit will change to 1 (true). Even though this is a 16-

bit register, only 15 bits (bit 0 through bit 14) are used. Bit 15 always

Syntax

STATus:OPERation:ENABle <NR1>

STATus:OPERation:ENABle?

<NR1> is an integer from 0 to 32767.

Returns

<NR1>

Examples

STATus:OPERation:ENABle 32767 sets all 15 bits of the register to 1.

DC MILLI-OHM METER

PROGRAMMER MANUAL

⎯ 41 ⎯

If the STATus:OPERation:ENABle? returns 0, all 15 bits of the register

are 0.

STATus:OPERation:EVENt(query only)

Function:

Returns and clears the contents of the OPERation register.

Syntax:

STATus:OPERation:EVENt?

Returns:

<NR1>

Examples:

STATus:OPERation:EVENt? returns 0.

STATus:PRESet

Function:

Set the OPERation and QUESTionable enable registers to zeros.

Syntax:

STATus:PRESet

STATus:QUEStionable:CONDition? (query only)

Function:

Return the contents of the QUEStionable register. Reading the condition

Syntax:

STATus:QUEStionable:CONDition?

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27

Komentáře k této Příručce

Žádné komentáře

Gw-instek GOM-802 Programming Manual Uživatelský manuál Strana 21

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Gw-instek GOM-802 Programming Manual