Gw-instek GDS-1000A Series Programming Manual Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Zařízení Gw-instek GDS-1000A Series Programming Manual. GW Instek GDS-1000A Series Programming Manual User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 32
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Digital Storage Oscilloscope
GDS-1000A Series
PROGRAMMING MANUAL
GW INSTEK PART NO. 82DS-1102AI01
ISO-9001 CERTIFIED MANUFACTURER
September 2009 edition
This manual contains proprietary information which is protected by
copyright. All rights are reserved. No part of this manual may be
photocopied, reproduced or translated to another language without
prior written consent of Good Will Corporation.
The information in this manual was correct at the time of printing.
However, Good Will continues to improve products and reserves the
right to change specifications, equipment, and maintenance
procedures at any time without notice.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng City, Taipei County 236, Taiwan.
Zobrazit stránku 0
1 2 3 4 5 6 ... 31 32

Shrnutí obsahu

Strany 1 - Digital Storage Oscilloscope

Digital Storage Oscilloscope GDS-1000A Series PROGRAMMING MANUAL GW INSTEK PART NO. 82DS-1102AI01 ISO-9001 CERTIFIED MANUFACTURER September 20

Strany 2 - INTERFACE OVERVIEW

COMMAND DETAILS 19 :ACQuire<X>:LMEMory Query Description Returns the total waveform data in the acquisition memory for long memory. Syntax &

Strany 3 - COMMAND OVERVIEW

COMMAND DETAILS 21 Parameter <X> Channel 1/2 Channel1/2 Example :acquire1:memory? Returns the channel 1 waveform data Data format Six data

Strany 4

COMMAND DETAILS 23 Channel / Math Command :CHANnel<X>:BWLimit ... 23:CHANnel<X>:COUPling

Strany 5

COMMAND DETAILS 25 :channel<X>:expand <Boolean> :channel<X>:expand? :chan<X>:exp <Boolean> :chan<X>:exp? Param

Strany 6 - :TRIGger:STATe 61

COMMAND DETAILS 27 :CHANnel<X>:PROBe:RATio SetQuery Description Sets or returns the probe attenuation factor. Same as: Channel key → variab

Strany 7 - COMMAND DETAILS

COMMAND DETAILS 29 Cursor Command :CURSor:X<X>Position ... 29:CURSor:Y<X>Position ...

Strany 8 - :SYSTem:VERSion

COMMAND DETAILS 31 :cursor:<X>delta? :curs:<X>del? Parameter <X> Horizontal or vertical cursor x Horizontal cursor (X axis)

Strany 9 - Acquisition Command

COMMAND DETAILS 33 Display Command :DISPlay:ACCumulate ... 33:DISPlay:CONTrast ...

Strany 10 - :ACQuire<X>:MEMory

COMMAND DETAILS 35 :REFResh Set Description Erases the existing waveform and draws a new one. Same as: Display key → F3 Syntax < Long > <

Strany 11 - Autoset Command

COMMAND DETAILS 37 Example :measure:source 1 :measure:fall? Selects Channel 1, and then measures the fall time. :MEASure:FOVShoot Query Descriptio

Strany 12 - Channel / Math Command

TABLE OF CONTENTS 3 Table of Contents INTERFACE OVERVIEW ... 4Rear Panel Overview ...

Strany 13 - :CHANnel<X>:OFFSet

COMMAND DETAILS 39 :measure:pduty? :meas:pdut? Returns <NR2> as the percentage Note Before using this command, select the measurement chann

Strany 14 - :CHANnel<X>:PROBe:TYPE

COMMAND DETAILS 41 :MEASure:RPReshoot Query Description Returns rise overshoot amplitude in percentage. Same as: Measure key → F1~F5 → F3 (RPResho

Strany 15 - Cursor Command

COMMAND DETAILS 43 Example :measure:source 1 :measure:vhi? Selects Channel 1, and then measures the global high Voltage. :MEASure:VLO Query Descri

Strany 16 - :CURSor:SOURce

COMMAND DETAILS 45 :MEASure:VRMS Query Description Returns the root-mean-square voltage. Same as: Measure key → F1~F5 → F3 (Vrms) Syntax < Long

Strany 17 - Display Command

COMMAND DETAILS 47 1 ~ 15 W1 ~ W15 <NR1> Reference waveform 1, 2 RefA, RefB Example :memory1:recall:waveform 1 Recalls a waveform from

Strany 18 - Measure command

COMMAND DETAILS 49 Example :ref1:display 1 Turns on the reference waveform A :REF<X>:LOCate SetQuery Description Moves or returns the positi

Strany 19 - :MEASure:PDUTy

COMMAND DETAILS 51 Time (Horizontal) command :TIMebase:DELay ... 51:TIMebase:SCALe ...

Strany 20 - :MEASure:ROVShoot

COMMAND DETAILS 53 Example :timetable:window:delay 100 Sets the zoom width to 100 points :TIMebase:WINDow:SCALe SetQuery Description Sets or retur

Strany 21 - :MEASure:VHI

COMMAND DETAILS 55 :RUN Set Description Starts waiting for a trigger condition. Same as: Run key Syntax :run :SINGle Set Description Selects the

Strany 22 - :MEASure:VPP

COMMAND DETAILS 57 Syntax < Long > < Short > :trigger:mode <NR1> :trigger:mode? :trig:mod <NR1> :trig:mod? Parameter <

Strany 23 - Save/Recall Command

INTERFACE OVERVIEW 5 Configuring the USB Interface USB connection PC side connector Type A, host GDS-1000A side connector Type B, slave Speed 1.1

Strany 24 - :REF<X>:DISPlay

COMMAND DETAILS 59 :TRIGger:REJect SetQuery Description Selects the trigger rejection filter. Same as: Trigger key → F4 → F3 Syntax < Long >

Strany 25 - :REF<X>:SAVe

COMMAND DETAILS 61 :trigger:source <NR1> :trigger:source? :trig:sour <NR1> :trig:sour? Parameter <NR1> Trigger source <NR1>

Strany 26 - Time (Horizontal) command

COMMAND DETAILS 63 :trigger:video:polarity <NR1> :trigger:video:polarity? :trig:vid:pol <NR1> :trig:vid:pol? Parameter <NR1> Pol

Strany 27 - Trigger command

COMMAND OVERVIEW 7 List of Command in Functional Order System *IDN ... 14

Strany 28

COMMAND OVERVIEW 9 Save/Recall :MEMory<X>:RECall:SETup ... 46:MEMory<X>:RECall:WAVeform ...

Strany 29 - :TRIGger:PULSe:TIMe

COMMAND OVERVIEW 11 List of Command in Alphabetical Order Command Page Command Page A *IDN 14 :ACQuire:AVERage 17 L :ACQuire:HDELay 18 *LRN

Strany 30 - :TRIGger:SOURce

COMMAND DETAILS 13 COMMAND DETAILS The Command details chapter shows the detailed syntax, equivalent panel operation, and example for each command.

Strany 31 - :TRIGger:VIDeo:POLarity

COMMAND DETAILS 15 Example :lrn? :DISPlay:WAVeform 0;ACCumulate 0;CONTrast 0;GRATicule 0;:CHANnel1:DISPlay 1;BWLimit 0;COUPling 0;INVert 0;OFFSet 2

Strany 32 - :TRIGger:VIDeo:TYPe

COMMAND DETAILS 17 Acquisition Command :ACQuire:AVERage .............. 17:ACQuire:HDELay .....

Komentáře k této Příručce

Žádné komentáře